OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 JANUARY 2009
MMC: 868 REMOTE STATION TRANSLATION
DESCRIPTION:
This MMC assigns a remote station number to the three or four digit number in the
switch dial plan. The telephone numbers are entered in MMC 724 Remote Station
(RS) section. The outbound telephone digits are entered in MMC 868 in the DGT:
section. These digits will be processed through MMC 710 for routing. These services
are great for Cell Numbers and Remote switch numbers.
1. Up to 999 entries can be entered. (0001-2000).
2. DGT: Digits to be received. Up to 12 digits may be entered.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRANSFER 868.
Display shows.
0001:TEL#[NONE]
DGT:
2. Enter valid index number, e.g. 0005,
via dial keypad
0005:TEL#[NONE]
DGT:
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
3. Enter digits to be translated (e.g. 8501)
via dial keypad and press RIGHT
0005:TEL#[NONE]
DGT:8501
soft key to move cursor.
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to advance to next
0005:TEL#[NONE]
DGT:8501
To Next Page
Loading...
