OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 825 NETWORK OPTIONS
DESCRIPTION:
When you have networked switches, this MMC is used to set the network related
options for Caller ID and Voice Mail.
These are the options:
0 ADD NUMBER TO NAME
Assign to include the extension number in the
name field of Q-SIG standard message.
1 USE REMOTE VM Assign to use SVM on remote system.
2 REMOTE VM NUMBER
Assign to access number of remote SVMi when
Remote VM is used.
3 REMOTE CID NUMB
Assign to use delete node number when CID
number send to SVMi.
4 USE REMOTE ATTN Assign to use Attendant on remote system.
5 REMOTE ATTN NUMB
Assign to access number of remote attendant
when the remote attendant is used (one access
number per ring plan).
6 SPNET SEND DIGITS
When IP networking systems, this option
determines the method used for sending digits
between nodes.
• MGI Signalling: follows the “DTMF TYPE”
setting in MMC 835 (inband or out of band)
for signaling between nodes.
• MCP Signalling: MCP sends IPC messages
to MCPs in other network nodes over IP with
digit information. MGI is not involved. This
does not
apply to analog devices sending
digits across the network (i.e. SLT)
PROGRAM KEYS
VOLUME Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to advance to the next MMC
HOLD Used to clear previous entry
To Next Page
Loading...
Need help?
General
