OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 824
6. Press UP or DOWN key to select YES or
NO for mailbox information.
10: NONE¬ 0033
SZ:3 MAX:06 MB:Y
Press RIGHT soft key to make change and
return to step 1.
7. Press TRANSFER to store and EXIT
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: NONE
SZ: 0
MAX: 00
MB: N
RELATED ITEMS: MMC 710 LCR DIGIT TABLE
MMC 724 DIAL NUMBERING PLAN
MMC 820 ASSIGN SYSTEM LINK ID
MMC 825 NETWORK OPTIONS
Note: You must have an entry in MMC 724 under Network LCR Num Plan for it to
appear in this MMC.
To Next Page
Loading...
