Samsung OFFICESERV 7100 User Manual

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2009
MMC: 740 SVM SYSTEM
DESCRIPTION: [Applies to v.4.30 or Higher]
This MMC is used to configure options for the mbedded Samsung Voicemail.
SVM AUTO SETUP
When the SVM starts, part of the startup procedure is to poll the OfficeServ 7100
for various data such as system date and time and the current ring plan. In addition
to this the OS7100 can also tell the SVM what Extension and Mailbox blocks to build
as well as what trunks exist in the system. This option determines if this data should
be sent to the SVM or not. The default setting is YES, which means that data will be
sent to the SVM upon each SVM reboot.
NOTE: To save boot time for the SVM it is recommended that after performing this
download once, and ensuring all data downloaded properly in the SVM, that you
set SVM AUTO SETUP to NO.
DOWNLOAD OPTIONS
When the SVM AUTO SETUP option is set to YES the OS7100 will send
configuration data to the SVM. This submenu allows you to choose which
information will be downloaded.
TYPE DESCRIPTION
STATION NAME This setting will allow the Subscriber name in the SVM to sync
with the Station Name in MMC 104. This is a bidirectional
synchronization which means that changes to MMC 104 will
be sent to the SVM and changes in the SVM will be sent to
MMC 104.
DLI/SLI Download the information for DLI and SLI ports according to
MMC 741
DESKTOP ITP Download the information for ITP keysets according to MMC
741
WiFi PHONE Download the information for WIP handsets according to
MMC 741
SIP PHONE Download the information for SIP stations according to MMC
741
VIR. DLI/SLI Download the information for Virtual DLI and SLI ports
according to MMC 741
Home Page
Table of Contents

Samsung OFFICESERV 7100 Specifications

General

Brand	Samsung
Model	OFFICESERV 7100
Category	Telephone System
Language	English