OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 730
checked after exact digits. If 1813 and 18∗∗ are entered, the system will check 1813
first. If no match is found, it will check 18∗∗.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select all
ACTION DISPLAY
1. Press TRANSFER 730.
Display shows.
COST DP (001)
DIGIT:
2. Dial CALL COST entry (e.g., 005)
OR
COST DP (005)
DIGIT:
Press UP or DOWN to select entry and press
RIGHT soft key to move cursor.
3. Enter digit string via the dial keypad
and press RIGHT soft key.
COST DP (005)
DIGIT:1305
4. Enter DIAL PLAN (0–8).
Press LEFT soft key to return to step 3 or
COST DP (005)
CALL RATE: 3
RIGHT soft key to go to step 2.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
DEFAULT DATA: NONE
RELATED ITEMS: MMC 317 CALL COST DISPLAY OPTION
MMC 422 COST RATE
MMC 729 RATE CALCULATION TABLE
To Next Page
Loading...
