OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 201 CHANGE CUSTOMER PASSCODE
DESCRIPTION:
Used to change the passcode allowing access to MMC 200 Open Customer
Programming from its current value.
NOTE: The passcode is four digits long. Each digit can be 0-9. The current (old)
passcode is required for this MMC.
PROGRAM KEYS
KEYPAD Used to enter passcodes
SPEAKER Save data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 201
Display shows
CUST. PASSCODE
NEW CODE:_
2. Enter new passcode via dial keypad
(maximum four digits).
CUST. PASSCODE
NEW CODE: 4444
3. Verify new passcode via dial keypad.
CUST. PASSCODE
VERIFY : 4444
Passcode verified (go to step 4)
OR
CUST. PASSCODE
VERIFY :SUCCESS
Passcode failure.
Return to step 2.
CUST. PASSCODE
VERIFY :FAILURE
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
DEFAULT DATA: PASSCODE = 1234
RELATED ITEMS: MMC 200 OPEN CUSTOMER PROGRAMMING
To Next Page
Loading...
Need help?
General
