OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 854 DIAGNOSTIC TIME
DESCRIPTION:
Provides a means to set the OfficeServ 7100 Diagnostic Time. The OfficeServ 7100
diagnostics tests include memory audits, internal loopback tests on digital trunks,
DSP, CID DSP. Additional tests include CODEC tests on analog trunk and station
cards and tone tests. If the diagnostics cannot complete the tests because of
system traffic, the system will abort the test and retry during the next programmed
diagnostic time. It is recommended to assign the diagnostic time during non-peak
traffic periods.
DIAL PAD DAY SELECTION:
0= Sunday 2 = Tuesday 4 = Thursday
6 = Saturday 1= Monday 3 = Wednesday
5 = Friday
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 854.
Display shows.
DIAGNOSTIC TIME
SUN: :
2. Press RIGHT soft key to move cursor.
DIAGNOSTIC TIME
SUN: :
3. Enter military time hour via the dial pad.
Cursor will advance to next entry.
DIAGNOSTIC TIME
SUN:23:
4. Enter military time minutes via the dial pad.
Cursor will advance to Step 1.
DIAGNOSTIC TIME
SUN:23:30
5. Press UP or DOWN key to make selection.
Press RIGHT soft key to make change and
DIAGNOSTIC TIME
WED: :
return to step 2
OR
To Next Page
