Samsung OFFICESERV 7100 - MMC: 217 STATION PAIR

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 217 STATION PAIR
DESCRIPTION:
Assigns a secondary station to a keyset. This secondary station can be a keyset. a
single line port or an ITP phone. It is recommended that the extension number for the
secondary station should be blocked from receiving direct intercom calls in MMC 314
to prevent the secondary station being accidentally called. The secondary station
assumes the COS (Class of Service), LCR COS, and DND attributes of the primary
station.
Note:
1. If the COS is changed for either station in MMC 301 the change affects both
stations.
2. Secondary stations when dialed will also ring the primary extension.
3. Message from secondary extension will display that (secondary) extension
numbers. Callback to extension (secondary) as well.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRANSFER 217
Display shows
[201] PRIMARY
SECONDARY:NONE
2. Enter the primary station number via dial
keypad (e.g. 201)
[201] PRIMARY
SECONDARY:NONE
OR
Press UP or DOWN to select and press
RIGHT soft key.
3. Enter the secondary station number via dial
keypad (e.g. 205)
[201] PRIMARY
SECONDARY:205
OR
Press UP or DOWN to select and press
RIGHT soft key.
Home Page
Table of Contents