OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 506 TONE CADENCE
DESCRIPTION:
Provides the ability to customize the tone cadence on a system-wide basis. There
are ten tone cadences available. Please call Technical Support before changing any
cadences as some systems may require default settings.
TONE NAME DESCRIPTION
BUSY TONE The called station is busy.
CONFM/BARGE A feature has been successfully activated/cleared or
a Barge In with Tone has been performed.
DIAL TONE The system is ready to interpret key presses/dialed
digits.
DND/NO MORE The called station is in DND or has no free CALL
buttons.
ERROR TONE An error has been made.
HOLD/CAMPON This is the system generated hold tone.
MSGWAT TONE This is the dial tone heard at an SLT with a message
waiting.
RGBACK TONE The called station is ringing.
RING TONE This is the CO ring cadence.
TRSFER TONE This is the dial tone heard when the transfer key is
pressed or an SLT hook flashes.
DID RGBACK This is the ringback tone heard by the outside party
when they dial a DID number.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 506.
Display shows.
BUSY TONE
CONTINUOUS TONE
To Next Page
Loading...
