OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 506
2. Dial tone number from above list (0–9, e.g., 9)
OR
TRSFER TONE
INTERRUPT TONE
Press UP or DOWN key to select tone, press
LEFT soft key and advance to step 3.
3. Dial tone option 0 for CONTINUOUS or
1 for INTERRUPT
TRSFER TONE
INTERRUPT TONE
OR
Press UP or DOWN key to select tone
control and press RIGHT soft key to advance
to step 4
OR
Press LEFT soft key to return to step 2.
4. Dial new value for interrupt times (must be
four digits).
TRSFER TONE:0100
9900 0100 9900
Press RIGHT soft key advances cursor.
Press LEFT soft key retreats cursor.
If valid entry, system returns to step 2.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: SEE BELOW FOR CADENCES. BY DEFAULT DIAL TONE AND
MESSAGE WAIT TONE ARE CONTINUOUS.
TONE ON OFF ON OFF TONE
0 BUSY TONE 500 500 500 500 Interrupt
1 CONFIRM/BARGE-IN TONE 50 50 50 50 Interrupt
2 DIAL TONE Continuous
3 DND/NO MORE TONE 250 250 250 250 Interrupt
4 ERROR TONE 250 250 250 250 Interrupt
5 HOLD/CAMP-ON TONE 500 3500 500 3500 Interrupt
6 MESSAGE WAIT TONE Continuous
7 RING BACK TONE 1000 3000 1000 3000 Interrupt
8 RING TONE 1000 3000 1000 3000 Interrupt
9 TRANSFER TONE 100 100 100 100 Interrupt
10 DID RINGBACK TONE 2000 4000 2000 4000 Interrupt
NOTE: All times are in milliseconds.
RELATED ITEMS: NONE
To Next Page
Loading...
