Samsung OFFICESERV 7100 - Page 342

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2009
MMC: 740
SPNET STN Create Extension blocks for all SPNET stations. Also creates
Mailbox blocks for any SPNET station where MBX is set to
YES in MMC 824
MOBEX STN Download the information for MOBEX ports according to
MMC 741
STN GROUP Download the information for Station Groups according to
MMC 741
PSTN TRUNK Writes all LOOP, T1, and PRI trunks to the SVM Trunks table
VOIP TRUNK Writes all SIP and H.323 trunks to the SVM Trunks table
SPNET TRUNK Writes all SPNET trunks to the SVM Trunks table
NOTE:
If during any test procedures you need to run the OfficeServ 7100 system with a
default database and power up with this MMC option set to YES the SVM database
will be overwritten according to the data in MMC 741 and the default numbering
plan.
PROGRAM KEYS
UP & DOWN Changes MMC data between YES and NO
KEYPAD 0 and 1 will change data and advance to other option
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 740.
Display shows.
SVM AUTO SETUP
YES
2. Press UP or DOWN to select a setting
OR
DOWNLOAD OPTIONS
STATION NAME:YES
Press RIGHT soft key to set auto setup
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: SVM AUTO SETUP: YES
DOWNLOAD OPTIONS
STATION NAME: YES
DLI/SLI: YES
DESKTOP ITP: NO
Home Page
Table of Contents