Samsung OFFICESERV 7100 - Page 279

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 712
5. Dial TRUNK GROUP access code 800-828 (e.g.,
801)
LCR ROUTE (05:2)
C:4 G:801 M:---
OR
Press UP or DOWN to selected access code
and press RIGHT soft key to move cursor.
6. Dial MODIFY DIGITS index number (e.g., 050)
OR
LCR ROUTE (05:2)
C:4 G:801 M:050
Press UP or DOWN to selected index number
and press RIGHT soft key to move cursor
OR
Press RIGHT soft key to enter NO index
LCR ROUTE (05:2)
C:4 G:801 M:---
number.
7. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: NONE
RELATED ITEMS: MMC 310 LCR CLASS OF SERVICE
MMC 710 LCR DIGIT TABLE
MMC 711 LCR TIME TABLE
MMC 713 LCR MODIFY DIGIT TABLE
Home Page
Table of Contents