Samsung OFFICESERV 7100 - Page 201

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2009
MMC: 502
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 502.
Display shows.
[201] NO ANS FWD
010 SEC →
2. Dial station number (e.g., 205)
OR
[205] NO ANS FWD
010 SEC →_
Press UP or DOWN key to select station and
press RIGHT soft key
OR
Press ANS/RLS to select all stations and
press RIGHT soft key.
[ALL] NO ANS FWD
010 SEC →_
3. Enter new value (must be three digits) via
dial keypad (e.g., 020).
[205] NO ANS FWD
010 SEC →020
System will return to step 2.
4. Dial timer number from above list (e.g. 2)
OR
[205] DTMP DUR.
0100 MS →_
Press UP or DOWN key to select and press
RIGHT soft key to move cursor.
5. Enter new timer value (must be four digits,
e.g. 0200).
[205] DTMP DUR.
0100 MS →0200
System returns back to step 2.
6. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
Home Page
Table of Contents