OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 106
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
A Acts as toggle between upper case and lower case
F Used to enter name for speed dial bin (see MMC 105)
ACTION DISPLAY
1. Press TRANSFER 106
Display shows
[201] SPEED NAME
00:
2. Dial station number (e.g., 205)
OR
[205] SPEED NAME
00:
Press UP or DOWN to select station and
press RIGHT soft key to move cursor.
If selected station has no speed dial bins, the
display will be as shown and a new
[305] SPEED NAME
SPDBLK NOT EXIST
station may be selected.
3. Dial speed dial location (e.g., 01)
OR
[205] SPEED NAME
01:_
Press UP or DOWN to scroll through location
numbers and press RIGHT soft key to move
cursor.
4. Enter the location name using the procedure
described above and press RIGHT soft key
[205] SPEED NAME
01:SAM SMITH
to return to step 2.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: NONE
RELATED ITEMS: MMC 105 STATION SPEED DIAL
MMC 606 ASSIGN SPEED BLOCK
To Next Page
Loading...
