Samsung OFFICESERV 7100 - Page 241

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 607
GBUSY NEXT
This ON/OFF option specifies if all agents are busy, specifies whether the next port is
called immediately during overflow time.
ACTION DISPLAY
1. Press TRANSFER 607.
Display shows.
[530] UCD GROUP
FIRST MSG :61
2. Press UP or DOWN to select UCD group or
dial group number
[542] SALES
FIRST MSG :61
OR
Press LEFT soft key to position cursor under
message number and enter new message
[530] UCD GROUP
FIRST MSG :25
OR
Press RIGHT soft key and advance to next
option using the UP and DOWN keys
[530] UCD GROUP
UCD RECALL:010 SEC
to select an option.
3. Press RIGHT soft key and advance to next
option Use the UP and DOWN keys to make
[530] UCD GROUP
UCD RECALL:010 SEC
a selection or make a selection using the
dial pad.
4. Press the LEFT soft key to ENTER the
selection and to return to step 1
[530] UCD GROUP
EXIT CODE :NONE
OR
Press the RIGHT soft key to return to step 3.
Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: SEE ABOVE
RELATED ITEMS: MMC 601 ASSIGN STATION GROUP
Home Page
Table of Contents