Samsung OFFICESERV 7100 - Page 176

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 419
PROIRITY OPTION
NO No priority on incoming ringing call.
(1 -9) Priority levels with 1 being the highest and 9 the lowest.
VM RBACK OPTION
YES/NO (Not used in US)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 419
Display shows first station
[201] DIST RING
DGP TONE :NONE
2. Dial trunk or station number (e.g., 705)
OR
[705] DIST RING
DGP TONE :NONE
Press UP or DOWN to select trunk or station
and press RIGHT soft key to move cursor.
Press UP or Down to select tone type
[2
01] DIST RING
SLT RING :NONE
Press RIGHT soft key to move cursor
[705] DIST RING
SLT RING :NONE
3. Dial 1–8 to select ring tone
OR
[705] DIST RING
SLT RING :NONE
Press UP or DOWN to select ring tone and
press RIGHT soft key to enter.
4. Dial 1–5 to select ring cadence
OR
[705] DIST RING
SLT RING :1
Press UP or DOWN to select ring cadence
and press RIGHT soft key to move cursor.
Home Page
Table of Contents