OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 102
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRANSFER 102
Display shows
[201] FORWARD
0:FORWARD CANCEL
2. Dial station number (e.g., 205)
OR
[205] FORWARD
0:FORWARD CANCEL
Press UP or DOWN to select station and
press RIGHT soft key to move cursor.
3. Dial 0 – 4 to select forward type
OR
[205] FORWARD
1:ALL CALL:NONE
Press UP or DOWN to select forward type
and press RIGHT soft key to move cursor.
4. Dial destination number (e.g., 201)
OR
[205] FORWARD
1:ALL CALL:201
Press UP or DOWN to select destination
and press RIGHT soft key to move cursor.
5. Dial 1 for YES, 0 for NO
OR
[205] FORWARD
CURENTLY SET :YES
Press UP or DOWN to select YES or NO and
press RIGHT soft key to return to step 2.
6. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
To Next Page
Loading...
