OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 601
NOTES: Calls to a group do not follow the call forwarding instructions of any
stations in the group.
I. GRP AUTOANS: OFF When this option is set to ON, intercom calls to the group
will Auto Answer/Voice Announce if the station is programmed for Auto
Answer/Voice Announce in MMC 103. CO calls will follow the AUTO ANS CO
setting in MMC 110 for a group member in addition to the group members setting
in MMC 103.
FEATURE KEYS
0 TYPE Group type
(Normal, VM/AA, UCD, VMUCD, BI-VMS GRP, MSG GROUP, SO
STN GRP, VMS UCD GRP, AA ONLY VM)
1 RING Ring mode (Sequential, Distributed or Unconditional)
2 OVERFLOW Overflow time (000 - 250 secs.)
3 GRP TRSF Group transfer time (000 - 250 secs.)
4 NEXT PORT Group or station number (e.g. group 502, station 221, 244)
5 MEMBER Group members (e.g., station 202, 225, 231)
6 NXT HUNT Hunt time (000 – 250 secs)
RING MODES
0 SEQUENTIAL The first idle station listed in the group will ring. If the first is
busy, the next idle station will ring.
1 DISTRIBUTED The first call will ring the first station listed in the group. The
next call will ring the next station listed in the group.
2 UNCONDITIONAL All the stations listed in the group will ring. Busy stations will
receive off-hook ring. MAXIMUM 32 STATIONS RINGING.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
To Next Page
