Samsung OFFICESERV 7100 - Page 231

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 603
4. Press RIGHT soft key to move cursor to
number of member and enter valid member
[801] TRK GROUP
MEMBER 05:NONE
number (1-60, e.g., 05) via dial keypad
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor.
5. Enter valid trunk number (e.g., 729)
OR
[801] TRK GROUP
MEMBER 01:729
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2.
6. Repeat steps 1-5 to remove trunk from group
9 if necessary.
7. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: ALL TRUNKS ARE IN TRUNK GROUP 9
RELATED ITEMS: LCR PROGRAMMING
Home Page
Table of Contents