Samsung OFFICESERV 7100 - Page 249

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 615
ACTION DISPLAY
1. Press TRANSFER 615.
Display shows the first available option.
USER: LOCAL ITP
MODE:SEQUENTIAL
Press UP or DOWN key to select an option
OR Press the RIGHT softkey to move cursor.
2. Press UP or DOWN key to select an option
OR press RIGHT soft key to move cursor.
USER: LOCAL ITP
MODE:SEQUENTIAL
3. Press UP or DOWN key to select an option
and press RIGHT soft key to enter data and
USER: LOCAL ITP
MODE:DISTRIBUTED
move cursor.
Press UP or DOWN key to select an option
and press RIGHT soft key to store entry and
USER: PUB IP ITP
MODE:SEQUENTIAL
move cursor to return to Step 1.
OR
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: ALL PORT ALLOWED
RELATED ITEMS: MMC 615: MGI GROUP
MMC 616: MGI USER
MMC 831: MGI PARAMETERS
MMC 832: VOIP OUTBOUND DIGITS
MMC 833: VOIP ADDRESS TABLE
MMC 834: H.323 OPTIONS
MMC 835: MGI DSP OPTIONS
MMC 836: H.323 GATEKEEPER OPTIONS
MMC 837: SIP OPTIONS
MMC 838: PRIVATE IP ADDRESSES
MMC 840: IP SET INFO
MMC 841: SYSTEM IP OPTIONS
Home Page
Table of Contents