Samsung OFFICESERV 7100 - Page 272

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 709
TOLL OVERRIDE: This table of eight entries is used to identify to the system numbers
that will bypass all dialing restrictions. This bypass includes Toll restriction, Trunk
access and forced authorization or account codes. Each entry in the table can be up to
14 digits long.
OVRD USE TRK GRP: This entry designates the trunk group that override calls will
access.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRANSFER 709.
Display shows.
PBX ACCESS CODE
1:
2. Select PBX , SPECIAL CODE or TOLL
OVERRIDE)
TOLL OVERRIDE.
1:
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor.
2. Enter index number (e.g., 3)
OR
TOLL OVERRIDE.
3:_
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor.
3. Enter via dial keypad the desired
access/feature code (e.g., 911).
TOLL OVERRIDE.
3:911
Press RIGHT soft key to enter and return
to step 2 and enter more entries.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
Home Page
Table of Contents