Samsung OFFICESERV 7100 - Page 287

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 715
MESSAGES 11-15 on the system are 16 character blank messages that can be
created.
NOTE: Each display keyset user can create 3 additional personal programmed
messages, 16~18 using MMC 115.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
“A” KEY Toggles from upper case to lower case
ACTION DISPLAY
1. Press TRANSFER 715.
Display shows.
PGM.MESSAGE (01)
IN A MEETING
2. Enter index number (e.g., 11)
OR
PGM.MESSAGE (11)
_
Press UP or DOWN arrow to make selection.
Press RIGHT soft key to move cursor.
3. Enter message via dial keypad using the
above table (maximum 16 characters).
PGM.MESSAGE (11)
SunBathing
Use “A” key to toggle upper case/lower
case.
Press RIGHT soft key to return to step 2.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: TEN PROGRAMMED MESSAGES AS DETAILED BELOW
01. IN A MEETING
02. OUT ON A CALL
03. OUT TO LUNCH
04. LEAVE A MESSAGE
Home Page
Table of Contents