Samsung OFFICESERV 7100 - Page 305

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 723
ACTION DISPLAY
1. Press TRANSFER 723.
Display shows.
TYPE:24 BTN SETS
01:CALL1 →
2. Enter type of set via dial keypad ( e.g.,5)
OR
TYPE:24 BTN SETS
01:CALL1 →
Press UP or DOWN key to make selection
and press RIGHT soft key.
3. Enter key number (e.g., 18)
OR
TYPE:24 BTN SETS
18:DS →
Press UP or DOWN key to make selection
and press RIGHT soft key.
4. Using table above, press dial keypad number
to make selection
TYPE:24 BTN SETS
18:DS →GPIK
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to advance cursor
to step 5 to enter extender, if required
OR
Press LEFT soft key to return to step 3.
5. If required, enter extender (e.g.,03)
OR
TYPE:24 BTN SETS
18:DS →GPIK03
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2.
6. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
Home Page
Table of Contents