Samsung OFFICESERV 7100 - Page 347

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2009
MMC: 741
STN GROUP: This section allows you to set the block structure for all
Station Groups in the OfficeServ 7100. By default all groups
are set to EXT.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 741.
Display shows the first station port.
DLI/SLI :2001
MAKE:BOTH GRP:01
2. Press UP or DOWN to select station type or
station group
DLI/SLI :2001
MAKE:BOTH GRP:01
OR
Press RIGHT soft key to select a station
2. Dial station number
OR
DLI/SLI :2001
MAKE:BOTH GRP:01
Press UP or DOWN to scroll the number and
press RIGHT soft key to select block type
3. Press UP or DOWN to scroll block type
OR
DLI/SLI :2001
MAKE:EXT GRP:01
Press RIGHT soft key to select group
4. Dial subscriber group number
OR
DLI/SLI :2001
MAKE:BOTH GRP:01
Press UP or DOWN to scroll group number
and press RIGHT soft key to select another
station
5. Press TRANSFER button to store and exit
OR
Press SPEAKER button to store and
advance to next MMC.
Home Page
Table of Contents