OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 741 USER MAILBOX
DESCRIPTION: [Applies to v.4.22 or Lower]
This MMC is only used for the Samsung embedded Voice Mail. It assigns each
station or group as having a mailbox (yes or no). When stations or groups are
flagged as YES, during Voice Mail card power up mailboxes will be created for each
directory number with a “YES” entry.
Once the Voice Mail database has been created new boxes can be added.
a) Through Voice Mail administration,
b) By adding a new mailbox in this system and cycling system power.
If a mailbox is to be removed it must be done through Voice Mail administration.
If a station that does not have an associated voice mailbox, calls the Voice Mail
system they will be answered by the Voice Mail system main greeting.
NOTE: Groups 514/5019 cannot be assigned mailboxes as these are the VM groups.
Mailboxes that are needed for people that do not have an extension must be added
through Voice Mail programming.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 741.
Display shows.
ASSIGN MAIL BOX
[201]: YES
2. Dial station number OR
Press UP or DOWN to scroll the number.
ASSIGN MAIL BOX
225 : YES
3. Press RIGHT soft key to move cursor.
ASSIGN MAIL BOX
225 : YES
To Next Page
