Samsung OFFICESERV 7100 - Page 394

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2009
MMC: 820
ACTION DISPLAY
1. Press TRANSFER 820.
Display shows.
SELF: LINK ID
2. Press UP or DOWN to select system.
SYS05: LINK ID
3. Press RIGHT soft key twice to move cursor to
entry field. Enter SYS LINK ID for each
SYS05: LINK ID
006
networked system.
4. Press RIGHT soft key twice to move cursor to
option field.
SYS05:SIGNAL G/W
Press UP to select SIGNAL G/W networked
system.
5. Press RIGHT soft key to move cursor to entry
field. Enter MCP IP address for each IP
SYS05:
192.168.0.XXX
networked system.
6. Press TRANSFER button to store and exit
OR
Press SPEAKER button to store and advance to
next MMC.
DEFAULT DATA: NOT USED
RELATED ITEMS: MMC 830: ETHERNET PARAMETERS
Home Page
Table of Contents