OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 JANUARY 2009
MMC: 110
FEATURES DESCRIPTION
12 CID REVIEW ALL
If this setting is set to OFF the CID review list
will only store CID information for calls that
were not answered at the station and reject
the information for calls that were answered.
When set to ON all calls will be stored in the
list.
13 SECURE OHVA
When set to OFF an OHVA will be heard
through the keyset speaker rather than the
handset.
14
NOT FOR USA
15
AUTO ANS CO
When set to ON CO lines programmed to
ring that keyset directly will auto answer if
the keyset is programmed for auto answer
in MMC 103
.
16
ENBLOCK 2LCD
For ITP Phones with 2 Line Display
Set to ON will require user to press SEND
button to make a call, it works like a cell
phone. Enblock dialing must be enabled in
MMC 861
.
17
STN NO RING
When ON all incoming calls will not ring at
stations.
18
FEATURE TONE (NOT FOR USE IN US).
19
RCV GPU INFO
Enables members of a pickup group with
“RCV GRP INFO” set to ON, to receive a
short ring burst along with the call info when
another member of the pickup group
receives a call.
20
MISSED CALLS
When set to ON the station will display
information about missed calls as well as
the ID of the most recent missed calls.
21
NO DISP TRK#
When set to ON, the feature disables the
trunk number from being displayed on
outgoing calls.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
To Next Page
Loading...
