OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 833 VoIP IP ADDRESS
DESCRIPTION: [Applies to v.4.22 or Lower]
This MMC provides the IP addresses in tables pointed to by the VoIP code entry
(MMC832). There are 63 tables with up to 16 entries each. The destination IP
address is required to route dialed digits based on the access code and digits
dialed. The IP entry field is divided into 4 sections allowing modification of separate
IP address fields.
¾ NOTE: When changing any IP address/value, listed below, three digits must
be input for each (octet) field. Example 192.168.1.10 input must be: 192 168
001 010
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 833.
Display shows the first table number.
TB(00) ENTRY (00)
165.213. 97.185
Press UP or DOWN key to select a table OR
press RIGHT soft key to move cursor.
2. Press UP or DOWN key to select a table entry
OR press RIGHT soft key to move cursor.
TB(00) ENTRY (00)
165.213. 97.185
3. Using the keypad input a 12 digit IP address
OR
TB(00) ENTRY (00)
165.213. 97.185
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC entry.
To Next Page
