OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2009
MMC: 841
Option Description Default
ITP TX GAIN/HSET Sets IP-based phone Handset TX gain value of each level. -
ITP RX GAIN/HSET Sets IP-based phone Handset RX gain value of each level. -
ITP TX GAIN/MIC Sets IP-based phone MIC gain value of each level. -
ITP RX GAIN/SPKR Sets IP-based phone SPKR gain value of each level. -
Sets IP-based phone software upgrade option with the
system. Used for automatic software upgrades.
-
0 TYPE: Sets IP-based phone software upgrade type..
a) MMC COMMAND: IP-based phone software upgraded
manually in MMC 840.
b) PHONE CON: IP-based phone software upgraded
automatically at phone connection.
c) AUTO TIME: IP-based phone software upgraded
automatically at set time.
MMC
COMMAND
1 START TIME: IP-based phone software automatic upgrade
start time.
0000.
(Disable)
ITP VERS
UPGRADE
(“PHONE TFTP IP”
and “PHONE
VERSION” must be
set).
2 INTERVAL: IP-based phone software automatic upgrade
interval time.
10 seconds.
MGI ALIVE PERIOD Time interval between heart beat check between MGI and
MCP.
-
DATA CARD IPC (NOT USED IN US) YES
ITP RING VOLUME LEVEL 1-8 1
ITP MAX TX LIMIT (NOT USED IN US) YES
M-FRAME: This value determines the transmission interval
time of VoIP packets generated by the WIP handset. The
range is 10~40 ms. Applies only to WIP to WIP calls (when
both WIPs are on the same subnet).
40 MSEC
WIP DSP PARA
ECHOCNCL: Enable echo cancellation on WIP handsets ENABLE
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 841.
Display shows the first available option.
ITP RESIGTRATION
ENABLE /ITP PSWD
To Next Page
