Samsung OFFICESERV 7100 - Page 464

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 845
ACTION DISPLAY
1. Select the MMC number [845].
845: WLAN PARA
SELECT PROG ID
2. Select RF channels for APs.
WLAN: RF CHANNEL
USE CH1:01
• Select a voice CODEC to be used while
busy.
WLAN : CODEC LIST
CODEC 1: G.729
• Assign RF channel for the system.
WLAN : RF CHANNEL
USE CH 1: 01
• The version information of the WLAN.
WLAN : VERSION
2005.08.31 v2.00
• Concurrent voice conversation per AP.
The quality of voice and data may suffer
WLAN : MAX AP CH.
08 (00:NO LIMIT)
if more than 8 is used per AP.
• Enable or disable the use of WLAN
switch.
WLAN : WLAN SWITCH
DISABLE
3. Set the following items in the SIP menu:
• Set GEN NO RESP to be used in SIP.
SIP : GEN NO RESP
005000 MS
• Set INV NO RESP to be used in SIP.
SIP : INV NO RESP
006000 MS
• Set REQ RETRY to be used in SIP.
SIP : REQ RETRY
005000 MS
• Set PROVISIONAL TIME to be used in
SIP.
SIP : PROVISIONAL
180000MS
• Set RETRANS T1 to be used in SIP.
SIP : RE-TRANS T1
000500 MS
Home Page
Table of Contents