OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2008
MMC: 116
1. When the character you want appears on the same dial pad key as the previous
character, press UP to move the cursor one space to the right.
2. Other symbols are available for DIAL #.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
A Key 19, acts as toggle between upper case and lower case
ACTION DISPLAY
1. Press TRANSFER 116
Display shows
[201] ALM REM(1)
HHMM: ÎNOTSET
2. Dial station number (e.g., 205)
OR
[205] ALM REM(1)
HHMM: ÎNOTSET
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all stations.
[ALL] ALM REM(1)
HHMM: ÎNOTSET
3. Dial 1~3 to select alarm (e.g., 2)
OR
[205] ALM REM(2)
HHMM: ÎNOTSET
Press UP or DOWN to select alarm and
press RIGHT soft key to move cursor.
4. Enter alarm time in 24-hour clock format
(e.g., 1300 for 1pm).
[205] ALM REM(2)
HHMM:1300ÎNOTSET
Display will automatically advance to step 5.
5. Dial valid entry from above list for alarm type
(e.g. 2)
[205] ALM REM
HHMM:1300ÎDAILY
OR
Press UP or DOWN to select alarm type and
press RIGHT soft key to move cursor.
6. Enter messages using above table and
press RIGHT soft key to return to step 2.
[205] ALM REM
Sam SMITH
To Next Page
