OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 5 APRIL 2007
5.3.60
Field Name Description
Busy timer Defines the length in seconds of a busy cycle
Busy count The number of busy cycles before assuming busy
OVERRIDE STRINGS SCREEN:
Field Name Description
Transfer The string to dial to place a caller on hold and get dial tone
No answer The string to dial to abort a call transfer when a no answer
condition is detected
Connect The string to dial to complete a transfer
Busy The string to dial to abort a call transfer when a busy condition is
detected
Rejected The string to dial to abort a call transfer when the call is rejected
Error The string to dial to abort a call transfer when and error is
detected
Initiate The string to dial to initiate a conference call
Set up The string to dial to establish the conference once the second
party has answered
Abort The string to dial to abort the conference if the second party does
not answer
Tear down The string to dial to terminate the conference once it has been
established
To Next Page
