Engineering via SICAM WEB
174 SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
Example: Process value analog
• Under the tab Parameter, select the category “Process valueanalog”
All signals assigned to that categorie are displayed.
• Enter the texts for names and states for the desired signals
• For the process display in the cockpit, assign the desired group number and the position
within the group
In this example, 2 measured values are assigned to the group positions 1 and 5. When the
positions 2, 3 and 4 are not used, at this place an empty line will be displayed on the LCD
(see 6.1.2.4.5, Cockpit).
• Enter the measuring range for the value adaptation
• Enter the number of decimal places for the display
Description of the parameters see Process value analog.