6.3.17 Exit Loading Softkey (EXITLS)
Description
You
can use the EXITLS function to exit the current user interface and load a defined softkey
menu.
Programming
Syntax: EXITLS
("Softkey menu"[, "Path
"])
Description: Exits dialog and loads a softkey menu
Parameters: Softkey menu Name of the softkey menu to be loaded
Path name Directory path of the softkey menu to be loaded
Example
PRESS(HS1)
EXITLS( "Menu1", "AEDITOR.COM" )
END_PRESS
6.3.18 Function (FCT)
Description
The
external functions are stored in a DLL file and identified by an entry in the definition lines
of the configuration file.
Note
The external function must have at least one return parameter.
Programming
Syntax:
FCT
Function name = ("File"/Type of return/Types of permanent parameters/
Types of variable parameters)
FCT InitConnection = ("c:\tmp\xyz.dll"/I/R,I,S/I,S)
Description: An external function can, for example, be called from the LOAD method or exe‐
cuted in the PRESS method.
Programming commands
6.3 Functions
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3 127
To Next Page
Loading...
Need help?
General
