Siemens SINUMERIK 828D Commissioning Manual

5.1.7 Example: This is how you configure the infeed (S120 Booksize)
Configuring the infeed (S120 Booksize)
Procedure:
1. Select "Change" to configure the infeed:
Figure 5-4 Infeeds > Overview
2. The characteristic data of the infeed detected with the automatic device configuration is
displayed:
Figure 5-5 Infeeds > Configuration
Commissioning the drive
5.1 Commissioning the drive
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 119

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash