<AccessLevelWriteDetailsAllParameter value="4" type="int" />
</SETTINGS>
9.2.2 Configure the tool lists
<LISTCONFIGURATION> tag
The entries used for configuring the following list views are located in the
<LISTCONFIGURATION> tag:
● "Tool List" window, identifier <SlTmToollistForm>, see the 1st example.
● "Tool Wear" window, <SlTmToolwearForm> identifier
● "Magazine" window, <SlTmToolmagazinForm> identifier
●
"Tool Data OEM" window, <SlTmTooloemForm>identifier
This window is hidden in the default configuration. The window is only displayed when you
enable it with <Enabled>, see the 3rd example.
● "Tool Selection" window, <SlTmToolselectionForm> identifier: In order to select a tool
this window can be displayed in the program input screen.
Entry Meaning
Enabled True - window is displayed.
False - window is hidden.
CAPTION Definition of the list name.
See 1st example: "Tool list" appears on the user interface for the
"TM_CAPTION_TOOLLIST" identifier.
COLUMNX Column selection: X stands for the column number.
TOOLTYPE_ALL The column setting applies to all tool types.
TOOLTYPE_XXX The column setting applies to a particular tool type. XXX stands for the
number of the tool type.
EMPTY_MAG_PLACE The column setting applies to an empty magazine location. Empty mag‐
azine locations appear in a list sorted according to magazine.
Item Identifier of the list parameter.
See
example: The column
in which the magazine number and magazine
location are displayed is created for the "ToolInMagInPlace" identi‐
fier.
Tool parameter identifiers (Page 240)
Cutting parameter identifiers (Page 242)
Monitoring parameter identifiers (Page 244)
Magazine location parameter identifiers (Page 246)
DELETE_COLUMN Delete column.
INSERT_COLUMN Insert column.
Tool management
9.2 Configuring the user interface
SINUMERIK Operate
236 Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
To Next Page
Loading...
Need help?
General
