5.1.2 Automatic first commissioning
Automatic first commissioning
Procedure:
1. After the complete drive system has powered-up, a dialog box for automatic device
configuration is displayed:
"A device configuration must be performed for the drive system
(all drive devices."
2. Select "OK" in order to start the automatic device configuration. The system topology is
then automatically read out. This operation can take several minutes.
Commissioning the drive
5.1 Commissioning the drive
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 95
To Next Page
Loading...
