Activating the PLC-controlled device
The device is addressed via output byte 10 and signals data set ready to the PLC via input
byte 9.
The output byte
is set to the specified coding for activation. The WHILE loop then waits for the
data set ready of the device.
Programming:
<SET_ACTIVE>
<DATA name = "plc/qb10"> 8 </DATA>
<while>
<condition> "plc/ib9" !=1 </condition>
</while>
</SET_ACTIVE>
2.6 Script language
Note
All script elements described in the Generating user dialogs (Page 5) function form the basis
for the "Easy Extend" function. Additional script elements are defined to manage additional
devices.
Program parts of the script
The script is divided into the following areas:
● "Easy Extend" identifier
● Frame to define the actions that can be executed for a device
●
Identifier for the device
● Identifier for commissioning the device
● Identifier for activating the device
● Identifier for deactivating the device
● Identifier for testing the device
● Identifier for the parameter dialog
The individual tags are described in the following chapters.
Generating commissioning dialogs
2.6 Script language
Easy XML
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3 129
To Next Page
Loading...
Need help?
General
