Siemens SINUMERIK 828D Commissioning Manual

10.4 This is how you create a commissioning archive
Overview
Control components can be saved individually or jointly. Creating a separate commissioning
archive for each component is recommended, so that the files can be read in again
independently of each other.
Precondition
The access level "Service" is required.
Creating a commissioning archive
Procedure:
1.
Select the "Startup" operating area.
2.
Press the menu forward key and then the "Startup archive" softkey.
The "Startup" window is opened.
3.
Select the "Create startup archive" option and confirm with "OK".
The "Create startup archive" window is opened:
Figure 10-1 Creating a commissioning archive
Easy Archive
10.4 This is how you create a commissioning archive
CNC commissioning
338 Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash