Siemens SINUMERIK 828D

"Custom" operating area
8
8.1 How to activate the "Custom" operating area
Activating the "Custom" operating area
The "Custom" operating area is not activated on delivery.
1.
First copy the slamconfig.ini. file from the
[System Siemens directory] /cfg directory to the
[System oem directory] /cfg directory
or correspondingly to the [System add_on directory] /cfg directory or [System user
directory] /cfg directory.
2. To activate the "Custom" operating area, the following must be entered:
[Custom]
Visible=True
Result
After activation is complete, the softkey for the "Custom" operating area can be found in the
main menu (F10) on the menu continuation bar on the HSK4 (= default).
The "Custom" operating area displays an empty window covering the entire operating area,
with a configurable header. All horizontal and vertical softkeys can be configured.
8.2 How to configure the "Custom" softkey
Configuring the softkey for the "Custom" operating area
The labeling and position of the softkey for the "Custom" operating area are configured in the
slamconfig.ini file.
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3 185