10.6 Example: Data archiving "Easy Archive" (use case)
Easy Archive
With "Easy Archive", the SINUMERIK 828D has a fundamentally new procedure for data
archiving.
This
procedure
is
tailored exactly to the needs of series machine manufacture. "Easy
Archive" is based on a strict separation between SINUMERIK system software, adaptation
data of the OEM data (machine data, manufacturer cycles) and operator data (part programs,
tool offsets). There is a further separation of the adaptation data, into data that is the same for
all machines of a particular type, and data that has been adjusted for a specific machine.
This will be clarified with an example:
User example
A machine manufacturer builds a vertical machining center in series. The adaptation data is
created on a prototype machine. This prototype machine's adapted data set will later be ported
to all series machines (cloned). After porting the data, however, individual settings are made
on each individual machine.
6HULHVPDFKLQHV3URWRW\SHPDFKLQH6LQJOHXVHUPDFKLQH
90&90&90&
8VHUGDWDFODVV
3DUWSURJUDPV
72$
=2$
,QGLYLGXDOGDWDFODVV
HJUHIHUHQFHFDP
&ORQHDUFKLYH
3DWFKDUFKLYH
0,8
0
Figure 10-2 User example
For example, reference cams
and ball screws are measured and entered as individual adapted
data. If an error occurs at the end user, the error is reproduced and solved on the prototype
machine. If a complete archive from the prototype machine is now transferred to the affected
machine, the individual adapted data of this machine is overwritten by the individual adapted
data of the prototype machine.
For the SINUMERIK 828D, the machine manufacturer's adapted data, to which no individual
change has been made, may be archived separately. If this archive is transferred to the relevant
machine, the individual adapted data and the end user data will definitely be retained. So the
machine manufacturer's update process is simplified considerably.
Easy Archive
10.6 Example: Data archiving "Easy Archive" (use case)
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 341
To Next Page
Loading...
Need help?
General
