Siemens SINUMERIK 828D Commissioning Manual

14.Select the "Finish >" softkey to exit the commissioning of this drive object. In case of
changes, a query to save is output.
15.To ensure that the data after power ON/OFF is retained, confirm with "Yes".
The data is saved
to the CompactFlash card and installed in a commissioning archive with
drive data.
The spindle has now been commissioned.
Commissioning the drive
5.1 Commissioning the drive
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 109

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash