Siemens SINUMERIK 828D Commissioning Manual

Pin Signal name NC variable Meaning
13 O12 DOUT12 --
● Without analog spindle:
Digital NC output 12
● With analog spindle:
Travel direction of the analog spindle (in
accordance with
MD30134 $MA_IS_UNIPOLAR_OUTPUT)
14 M3 MEXT3
Ground for pins 9, 10, 12, 13
NOTICE
Shielded signal cables for analog signals
To ensure safe, fault-free operation of the system, shielded cables with shield connection
should be used for the wiring of the analog outputs.
(See also: EMC compatibility)
See also
Machine data for an analog spindle (Page 85)
Commissioning the drive
5.5 Terminal assignments
CNC commissioning
148 Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash