Siemens SINUMERIK 828D

P 2: 3000 [Feed]
P 3: 3770 [Measuring time]
P 4: 0 [Measuring system Axis 1 - 0: active; 1:first; 2: second]
P 5: 0 [Measuring system Axis 2 - 0: active; 1:first; 2: second]
@Representation
P 10: 10
[Resolution]
P 11: 9 [mean / prog. radius - 8 = mean R ; 9 = prog. Radius]
P 12: X1 [Axis name 1]
P 13: Z1 [Axis name 2]
@Intermediate values
P 20: 15.6632 [max. radius measured values]
P 21: 10.9326 [min. radius measured values]
P 22: 13.6694 [mean radius measured values]
P 23: 1886 [Number of measured values]
@Additional values
P 30: 1000 [Accuracy (1/P30))
@Physical units
P 40: 5370 [Text number radius unit]
P 41: 5381 [Text number feed unit]
P 42: 6165 [Text number Resolution unit]
P 43: 5346 [Text number DeltaRadius unit]
P 44: 0 [New: Operate: Basislengthunit]
@Abscissa
Ai: [Abscissa values i: 0..P23]
@Ordinate
Oi: [Ordinate values i: 0..P23]
@Radius
Ri: [Radius values i: 0..P23]
Tuning
6.6 Circularity test
CNC commissioning
212 Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3