Siemens SINUMERIK 828D Commissioning Manual

3. Create a directory for the desired language of the online help under the following path: /
oem/sinumerik/hmi/hlp/<lng> and copy the hmi_prog_help.xml file there
Use the specified language code from the list of language codes for file names. The
directory names must be written in lower case.
4. Copy the language-dependent prog_help_<lng>.ts file for the brief description to the
following path: /oem/sinumerik/hmi/<lng>/prog_help_<lng>.ts
5. Copy the html files with the description of the OEM cycles to the following directory:
/oem/sinumerik/him/hlp/<lng>/hmi_prog_help/cycle<n>_help.html
The settings become effective only after restarting the system.
See also
Example: This is how you generate an OEM-specific online help book (Page 66)
Operating software settings
3.7 Creating OEM-specific online help
CNC commissioning
76 Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash