Siemens SINUMERIK 828D Commissioning Manual

Procedure
1. Start the OPC UA "Sample client".
Figure 3-2 Sample Client main window
2. Select the "New" entry from the drop-down list.
The "Discover Servers" window opens.
Testing the connection
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 15

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash