Siemens SINUMERIK 828D

Figure 4-7 Delete password dialog
Note
The password functionality is already set with these dialogs. The dialogs do not correspond
to the dialogs of SINUMERIK Operate.
The dialogs can be called either via the Load softkey (LS) function or the Load mask (LM)
function:
1.
Call via the Load softkey (LS) function:
LS("Passwd","slespasswd.com",1)
Extension of the vertical softkeys:
– Softkey 1: Set password
– Softkey 2: Change password
– Softkey 3: Delete password
2. Alternatively, the three screens can be opened directly by calling the Load mask (LM)
function:
– Set password: LM("PWD_SET", "slespasswd.com",1)
– Change password: LM("PWD_CHG", "slespasswd.com",1)
– Delete password: LM("PWD_CLEAR", "slespasswd.com",1)
Dialogs
4.1 Structure and elements of a dialog
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3 49