Spectra T950 - Page 156

Chapter 4 — Configuring the Library Setting the Camera IP Address
November 2016 User Guide—Spectra T950 Library
156
5. SelectNetwork > General settings.
6. OntheNetworkGeneralSettingsscreen,selectGet IP address
automatically(DHCP)orUse fixed IP address.
IfyouselectUse fixed IP address, setthedesiredIP,subnetmask,and
gatewayaddressesasrequiredforyournetworkandDNS(Domain
NameServer)information.Thefactorydefaultsare:
Notes:  ThePrimaryDNSaddressisrequiredinordertousethe
emailalertortoaccessthecamerabyhostname.
 TheSecondaryDNSisoptional.Ifprovided,itisusedifthe
PrimaryDNSisunavailable.
7. ClickSave.
8. Aftersavingthenewcameraconfigurationverifythesettingsby
attemptingtoaccessthecameraatthenewIPaddressorhostname(see
UsingaWebBrowseronpage175).
9. Ifthelibrarycontainsmultiplecameras,repeatStep1onpage155
throughStep8foreachcamera.MakearecordoftheIPaddressfor
eachcameraandtheframeinwhicheachcameraislocated.
IP Address Subnet Mask Default Gateway
10.10.10.11 255.255.255.0 10.10.10.1
Figure 91 If you select Use fixed IP address, configure the IP
address for the camera.