Spectra T950 - Page 216

Chapter 6 — Configuring and Managing Partitions Modifying an Existing Partition
November 2016 User Guide—Spectra T950 Library
216
3. Ifyouconfiguredthepartitiontouseencryptionorifyouwantto
enableencryptioninapartitionthatdidnotpreviouslyuseit,select
Security > Encryptiontologintotheencryptionfeature.The
EncryptionUserLoginscreendisplays.
a. Typetheencryptionuserpassword,ifoneisset.Otherwise,leave
thepasswordblank.
b. ClickOKtodisplaytheEncryptionConfigurationscreen.Afteryou
logintotheencryptionfeature,youcanmodifytheencryption
settingsforthepartition(seeSelecttheEncryptionModeon
page202).Youcanalsoconfigureencryptionsettingsandmanage
BlueScaleencryptionkeys.SeetheSpectraTapeLibrariesEncryption
UserGuidefordetailedinformationaboutenablingandconfiguring
encryptionforapartition.
4. Fromthetoolbarmenu,selectConfiguration > Partitionstobeginthe
partitionconfigurationprocess.TheSharedLibraryServicesscreen
displays.
Figure 138 Log into the Encryption feature if you need to
change the encryption setting for the partition.
Figure 139 The Shared Library Services screen.
Click Encryption to
display the Encryption
User Login screen.