Spectra T950 - Page 267

Chapter 8 — Using the Cartridge Inventory Moving Cartridges Within a Partition
November 2016 User Guide—Spectra T950 Library
267
5. UsetheDestinationdrop‐downlisttoselectthetypeoflocationto
whichyouwanttomovethecartridge,thenclickGo.Thedestination
listrefreshestoshowalloftheemptyslotsintheselectedlocation.
Notes:  Theavailabledestinationsdependonthetypeofpartition
youselected.
 TheTo TAPoptionisonlyavailablewhenaccessingthe
BlueScaleuserinterfacefromthefrontpanel.
Important
You cannot use the Inventory screen to move a cleaning cartridge in a cleaning
partition to a drive in a storage partition. Instead, use the Clean button on the
Drives screen (see
Manually Cleaning a Drive on page 456).
Figure 167 Select the Destination for the cartridge.
Available destinations
(storage partition shown)
Partition Type Available Destinations
Storage  Storage—Listsalloftheemptyslotsintheselectedstoragepartition’sstorage
pool.
 Entry/Exit—Listsalloftheemptyslotsintheselectedpartition’sentry/exit
pool.
 To TAP—Configuresamovethattransfersthemagazinecontainingthesource
slottotheTAPsothatyoucanremovethecartridgefromthespecifiedslot.
Themagazineisthenreturnedtoitsoriginallocation.
 Drives—Liststhedrivesinthepartitionthatarecurrentlyempty.
 All—Listsalloftheemptyslotsinthepartition,regardlessofthelocation.
Note: SelectingaspecificdestinationtypeinsteadofusingAlldisplaysfewer
itemsthroughwhichyoumustscrolltolocatethedesireddestinationslot.